Everyone knows that gears are the most widely used general mechanical parts in the transmission system of mechanical equipment. Traditionally, carburizing technology and high-frequency surface quenching technology are used, and low carbon steel is used to make the surface of the workpiece wear-resistant. , The process has good comprehensive performance, but due to high cost, easy to cause environmental pollution, and inconvenient to deal with large modulus gears and large gear shafts, currently only used in specific industries such as automobiles, tractors, etc. With the continuous improvement of technology, this gear is widely used in mechanical equipment and effectively solves the above problems.
The gear Laser Marking Machine uses advanced 3D dynamic marking technology, and can set the distance of different heights in the software to mark the surface that is not on the same plane. Its maximum 7000mm / s marking speed and high-speed galvanometer scanning are suitable for industrial mass production, and it uses a fully enclosed optical path, imported CO2 RF laser, and strict multiple protection control design to ensure the overall stability of the equipment.
Product advantages:
1. Fully enclosed maintenance-free laser optical system, no adjustment, ready to use, high-precision, high-speed marking / cutting performance, working efficiency increased by 20% compared with similar models.
2. The original coherent radio frequency laser imported from the United States has high power, good spot quality, stable power, and a life span of more than 20,000 hours.
3. Professional constant temperature circulating industrial cooling water system makes the whole machine run more stable, lower power consumption, strict multiple protection control design, applicable to a wide range of ambient temperature, to ensure 24 hours of continuous and reliable operation of the laser marking system. 
Editor in charge: Liu Qingqing
