Home>Bearing knowledge>Continuous casting machine guide roller lifting end, positioning end bearing solution plan

/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131";

Continuous casting machine guide roller lifting end, positioning end bearing solution plan

---

/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';

The Schaeffler Group Industrial Division (INA/FAG) offers the best bearing solution for continuous casting production: full FAG cylindrical roller bearings for guide rolls and open and sealed FAG spherical rollers Bearings, for INA needle roller bearings with zero section, split FAG spherical roller bearings for driving rollers and INA cylindrical roller bearings, in addition to the FAG special bearing housing for circulating water cooling, the product scale is getting better. For ten years, the Schaeffler Group Industrial Division has been a professor of bearing applications in the production and processing of steel and non-ferrous metals.
The newly developed FAG cylindrical roller bearing combines the advantages of full complement cylindrical roller bearings with spherical roller bearings. Most of the standard floating bearing can only provide a compromise plan; The degree of satisfaction is high. The newly developed FAG cylindrical roller bearing for the floating end of the continuous casting guide roller provides such a solution for the floating end; the bearing is not only radial load but also has an axial direction; Displacement adjustment can be used to compensate for the misalignment. In addition, this bearing can also be easily and quickly installed with an aspirational floating bearing concept. This FAG cylindrical roller bearing is specially developed for the continuous casting machine to float the end. It has an anti-corrosion coating; it has been successfully verified by the use of many guide rolls in many well-known customers.
At the guide roller positioning end we recommend the use of FAG spherical roller bearings. It is uniquely suited for high radial loads; it also has high axial loads and misaligned conditions. Even in harsh working environments In the case of extremely high loads; spherical roller bearings can also work reliably together; they can also compensate for shaft deflection and misalignment caused by bearing support. After the improvement of internal depiction; new spherical roller The bearings have better dynamics. The 240 and 241 series of spherical roller bearings with an outer diameter of 320 mm are equipped with a new stamped steel cage. This high temperature resistant two-piece cage is uniquely suited for continuous casting machines. The stress environment. A large number of spherical roller bearings used in continuous casting machines require a lot of grease. Regarding the use of continuous casting machines; sealed bearings have proven to be a cost-effective and environmentally friendly choice. Compared with open bearings They allow the bearing to be used throughout the life cycle; the grease usage is reduced to 80%.

---

Recommend to friends comments close window

Bearing related knowledge

Analysis of the bearing fatigue damage and the key points of the engine bearing repair and attention. The application of the classification bearing of the joint bearing analysis of the reasons and countermeasures affecting the service life of FAG imported bearings

This article links to http://
Please indicate the bearing network http://

Previous:Selecting the "six major problems" of INA bearing demand thinking
Next: Detailed Discussion on Damage and Discrimination of TIMKEN Bearings