Indentation molds, indentation molds are used for both sides of the operation, specifications, and a wide range of practical applications. The indentation mold not only complements the following problems with the hand-bonding bottom mold, but the overall profitability of the cartons using this product does not improve. There is no perfect indication on the active die-cutting machine semi-active die-cutting machine. The indentation mold is not only a mechanism for the use of a top mold, a die cutting machine, but also a low price for a fiber bottom mold. Suitable non-common paper types and thickness, die-cutting machine selection of indentation die when paperboard die-cutting, and the price is cheap, durability is weak, suitable for owed, foreign, young version is the same. Even if the master has already used his work to mark the mold, he can also use it skillfully. As shown in FIG. 1, the indentation mold is formed by a. indentation bottom mold, b. positioning plastic strip, c. weak base film, d. maintenance adhesive strip. The indentation bottom mold is the working body of the indentation mold, and the adjacent groove takes the indentation line and folds the crease on the paper; the above non-wet glue firmly adheres the indentation mold to the die-cutting machine. On the bottom plate. The cover adhesive tape is used to protect the indentation mold from being damaged during storage and transportation. The use of indentation molds is simple and convenient. Before application, clean the die-cut bottom plate with a version of shovel and turbid liquid. In application, after measuring the youngness of the indentation line on the template of the bad guy, the indentation die is determined according to a lesser degree of measurement, as shown in FIG. 2 , and the elastic opening tooth card of the positioning glue b is placed on the indentation line M; Adhesive d; The die-cutting plate unloading, and then Xie Jing die-cutting machine once, the indentation die will be positioned on the bottom die plate S; tearing and positioning adhesive strip b, indentation die positioning achieved. The bottom of the mold plate from the new demolition, doors and windows [high-grade copper doors and windows series], Kai-static die-cutting machine will retreat only die-cutting, as shown in Figure 3, the sun room plated hard chrome. The paper box has a variety of shapes and shapes, and the paper used for die-cutting color box is not identical. Different types of indentation molds must be used for different box shapes and papers. The specification of the indentation die is shown in the following steps: pit depth × pit width, for example, SLB 0.4×1.3 Schematic This specification is: Scale type indentation mold, pit shallowness 0.4 mm, pit depth 1.3 mm.
In the die-cutting indentation, the sun room, non-common type of paper should adopt different specifications of the indentation die, and there is no difference between the external cardboard type and the corrugated paper type.
When the cardboard is die-cut, the choice of indentation mold: After the first use the caliper to measure the thickness of the paper. The thickness of the indentation line to be used shall be less than or equal to the thickness of the paper. Selecting the shallowness of the pit of the indentation mold is the thickness of the paper relaxation. The width of the pit of the indentation mold can be selected according to the private choice: the indentation mold The pit width = paper relaxation thickness × 1.5 + thickness of the indentation line. For example: the thickness of the jam is 0.52mm, and the thickness of the indentation line is 0.71mm. Calculation: pit depth of the indentation die = 0.52≈0.5mm indentation die The pit and groove tightness = 0.52 × 1.5 + 0.71 = 1.49 ≈ 1.5mm should be selected indentation model number is 0.5 × 1.5 die-cutting corrugated paper when the choice of indentation mold: After the first should measure the current thickness of corrugated board, choose indentation The thickness of the thread should be less than or equal to the thickness of the corrugated paper. The shallowness of the selected groove should be equal to the thickness of the corrugated paper. The hardness of the indentation mould is in accordance with the type: The width of the indentation mould is equal to the width of the corrugated paper. 2.0+ indentation line thickness. Example: Corrugated paper thickness is 0.85mm, and the thickness of indentation line is 1.0mm. Calculation: The depth of the pit of the indentation pattern = 0.85mm ≈ 0.8mm The width of the pit of the indentation pattern = 0.85 × 2 + 1.0 = 2.7mm The indentation model number should be 0.8 × 2.7. The indentation mold's maneuverability and convenient application performance can be adapted to the variety of still life types in cartons and cartons, and the stagnation of batches and batches. As a result, more and more cardboard boxes and cartons have been granted to the green eyes of agricultural enterprises. This not only reduces the process of the mature production, but also saves the cost of the agricultural production. It also provides a reliable guarantee for the company's services that are of inferior quality and quick speed.
