The lettering depth of the Laser Marking Machine can be adjusted to a certain degree. The lettering depth adjustment method of the laser marking machine is as follows:
1. Increase the power of the laser coder, which is the most direct adjustment method.
2. The marking speed of the laser marking machine is slowed down. The same power, the same as other parameters, only changes the marking speed, and the depth of the marking will certainly be a bit deeper.
3, the field of the laser coder into a small range of field mirrors, after the conversion, the depth of the marking will be deeper, such as the current semiconductor laser marking machine can match the 110 field lens, become With a field lens of 50, its total laser energy and lettering depth will reach approximately twice the previous effect.
4. Changing the imported field mirror can also deepen the depth of the marking. For example, a semiconductor laser coder uses a German lens, and a CO2 lens uses a uniform tip of the US 26, which can rise to a certain depth.
5, the laser marking machine laser mode becomes better, the marking depth also has a certain increase, such as semiconductor laser marking machine, plus small holes, increase the cooling accuracy, adjust the laser mode light, make the laser Largest, roundest and brightest.
6. Replace the laser and replace it with a more powerful laser. Directly increase the lettering depth of the laser coder.
7. Replace the better laser marking accessories, such as the semiconductor laser marking machine, using the imported Q switch, the marking depth will be better.
