For the split-type models that are prone to disconnection, the manufacturer adopts a more comprehensive nozzle cleaning and unblocking system. That is, under the “nozzle protection seat” there is a dedicated pump accessory for cleaning the nozzle, which is used to periodically withdraw the ink from the cartridge. Let each color ink pass through the nozzle hole, and finally spray from the nozzle to clear the pipeline to ensure the smooth flow of the purpose. These multiple colors of ink ejected from the nozzle are finally mixed together to become waste ink, which is to clean the print head. In the whole process, many people referred to it simply as “shampooing.” When installing a continuous ink supply system, it was necessary to clean the nozzles several times and it was relatively easy to produce ink. Therefore, customers who use continuous ink supply systems need to understand more. Fei ink cleaning method.
The waste ink produced by the “shampoo” has to be stored in a place, so the manufacturer set up an independent plate in the lower part of the printer, which is called the waste ink tank (also called waste ink tray). The “washing head” of waste ink passes through the pipeline. Go directly to the waste ink tank below the printer.
The one-piece Inkjet Printer replaces the Ink Cartridge and replaces the nozzle. Therefore, there is no pump attachment and there is no ink cleaning. It produces very little waste ink. The waste ink tank is under the “nozzle protection seat” and the waste ink tank is covered with rubber. The remaining ink scraped by the scraper will become stuck in the waste ink tank over time. However, due to the large amount of waste ink that is separated, the volume of the waste ink tank is also large. At the same time, a cotton blanket is placed in the waste ink tank to absorb the waste ink.
Nozzle cleaning is essential (ink cartridges, head split models)
Nozzle cleaning is the main reason for the waste ink. If you do not have the “shampoo” action for pumping ink from the nozzles of the pump, printing will not work. Some people will remove the pump attachments. As a result, the printing quality cannot be guaranteed. Causes damage to the sprinkler. The reason is very simple: there is no ink suction action of the pump attachment to the nozzle, so that the nozzle is filled with ink droplets to be ejected at all times, which can not ensure the smoothness of the nozzle, and can not guarantee the quality of the printed work, especially the Piezoelectric head of the nozzle. The Epson printer with the spray head attached to the printer.
Water does not rot, if there is occasional slight false blocking of dry ink in the nozzle can not be timely through the "shampoo" to clear, then this false blocking phenomenon will come true for a long time plug nozzle, middle and low printer replace the nozzle if the warranty period, the price ratio Not much money is needed to buy a new machine, which shows that the price of the nozzle is high.
Waste ink count clears and clears the basics of waste ink tank
The waste ink warehouse is always big again, but when will the waste ink volume of the waste ink warehouse reach the limit? For this reason, the manufacturer sets a protection counter, and the protection counter will accurately “wash” each time. The amount of waste ink is automatically recorded. When the waste ink produced reaches the upper limit specified by the manufacturer, different printers will be displayed in different ways. Generally, the Canon printer will use the buzzer alarm sound or the number of panel indicator flashes. Indicated.
All the lights on the Epson printer's front panel will flash alternately. At the same time, whether it is a Canon or a Epson printer, it will stop working. This problem is called waste ink counter full, or waste ink overcapacity. In theory, in order to regularly clean these waste inks that may cause printing abnormalities or printer damage, it is necessary to design a protection counter with a total amount of this waste ink.
If you want the printer to work again, you must let this protection counter count from zero, which is the waste ink count is cleared. The upper limit of the waste ink count is large for some model printers. That is to say, the upper limit points are different depending on the model of the printer. Therefore, different types of printers use the same amount of waste ink. The time is not the same.
The method of waste ink resetting is included in the scope of maintenance by the manufacturer. Therefore, it is free to repair and maintain the printer within one year of purchasing the printer. Since the actual printing amount of each printer is different, there are problems and the processing methods are different, and the time for reaching the upper limit of the protection counter is not the same. The general situation is that the new machine uses six months to one year. Another point is that since it is included in the scope of maintenance and repair, then the count of protection counters is set by the manufacturers and confidential to users, so the phenomenon of waste ink overcapacity is sudden, without any precursors.
The waste ink count is cleared, but the counting of the protection counter is restarted, and the waste ink present in the waste ink tank is not reduced. If the waste ink in the waste ink tank is removed, it is usually referred to as cleaning the waste ink tank. From a procedural point of view, there will be waste ink overcapacity. It should be first to check and clean up the waste ink tank, and then waste ink counts should be cleared.
