Introduction to lighting classification standards and marking requirements

According to the way of preventing electric shock

Class 0 luminaire (Class 0 luminaire)

Relying on basic insulation as a luminaire for protection against electric shock. In case of basic insulation failure, the protection against electric shock has to rely on the environment.

Class I luminaire

The protection against electric shock of the luminaire not only relies on basic insulation, but also includes additional safety measures, that is, connecting the accessible conductive parts to the protective grounding conductors in the fixed line, so that the accessible conductive parts do not fail in the event of basic insulation failure. charged.

Class II luminaire

Protection against electric shock not only relies on basic insulation, but also has additional safety measures, such as double insulation or reinforced insulation, but there are no measures to protect the ground or depend on the installation conditions.

Class III luminaire

The power supply used is a SELV (safety extra-low voltage), and no voltage higher than SELV is generated inside the lamp.

Press dustproof, solid foreign body and waterproof grade IPxx

Lamp marking requirements:

The marking should be clearly and durable marked on the luminaire. The minimum height of the text is 2mm and the minimum height of the symbol is 5mm.

The test method for durability of the test mark is to rub with a cloth soaked for 15 seconds. After drying, it is rubbed with a cloth soaked with gasoline for 15 seconds, and then visually inspected after the endurance test is completed. After the test, the mark should be legible, the label is not easy to fall off and not curled.


Reading era
Shenyang overpass lighting design solar lawn record time lapse lights designer salon Shanghai station


1