The past craft:
Low-voltage switchgear, fuses, atmosphere switches, venting shields, etc., are now ink-printed, including model specifications and product identification.
The problems of the old craft:
The ink is easy to fall off, not delicate, the variety of multi-plate version is poor, and the consumption of consumables (ink) is high.
In order to add ink to the ink, it is necessary to add a curing agent. It is required to change one Ink Cartridge every 8 hours, even if the ink cartridge is not used up, and the 80-gram ink cartridge of the entrance is about 400 yuan, three shifts per day for three shifts. The printing machine counts up to several hundred thousand yuan per year.
Innovative process:
The content is marked with a laser to reach no consumables, the Eternal World logo will not fall off, the engraving is exquisite, and the plate making is convenient.
Existing topics:
Due to the large size of the casing of the low-voltage electrical appliance, many products are currently using laser marking process results are not good, by changing the process, the plasticity of the outer casing is changed, and it is easy to use laser marking.
New process requirements:
1. Now the speed of the pad printing machine is about 2-3 seconds/piece, and the speed of the laser machine is also almost the same.
2. The characters are required to be thin, the color is high, and the group requires clear lettering.
3. It is recommended to use 10W or above optical Fiber Marking Machine with clear mark, lower consumables and more convenient maintenance.
|
