![]()
Brand AVX TPSE226M035R0125 Low impedance tantalum capacitor AVX 22
![]()
Electronic scale crystal oscillator 3.2*2.5mm 3225 16M (16.000MHZ) 12PF 10PPM 20PPM 30PPM
![]()
Probe high current needle 120 needle head diameter is 3.0 threaded needle high current needle total length is
![]()
SMD aluminum electrolytic capacitor
For ease of installation, operation, and maintenance, the wiring between all equipment in the electrical secondary circuit is labeled, which is the secondary circuit number. The labels generally use numbers or a combination of numbers and words that indicate the nature and use of the loop.
The basic principle of the circuit label is that all the equipment should be connected by the terminal block with the control cable. In addition, some devices installed on the top of the screen and the devices in the screen also need to go through the terminal row. At this time, the top device can be regarded as an off-screen device, and the connection line is also given by the loop number principle. With the corresponding label.
For the sake of clarity, different reference methods are used for the DC loop and the AC loop, and in the AC and DC loops, different numbers are assigned to different loops, so in the secondary loop wiring diagram, we see Once labeled, the nature of the loop is known for ease of maintenance and overhaul.
